- Clean your siding with a pressure washer
- Paint your siders to protect them from the elements
- Inspect for any cracks in the paint and seal them up with caulking or silicone
- Replace any loose tiles on your roof, which can be a safety hazard
- Fix any holes in your gutters or downspouts before water can get inside of the house
Clean your siding with a pressure washer
Using pressure washers to clean siding is not a new idea, but it’s something that most people don’t do. The pressure washer can be used to blast away dirt and grime on the exterior of your house in preparation for painting or caulking. If you live close to an industrial area where there are high levels of pollution in the air then by all means use this method regularly!
Pressure washers are a great tool for removing dirt, grime, and paint from siding before painting. They can also be used to remove mildew or algae that has accumulated on the exterior of your house.
If you live close enough to an industrial area where there are high levels of pollution in the air then by all means pressure wash regularly!
The power behind these units ranges anywhere from 2000-4000 PSI with most running at around 3000PSI. Higher-end models usually come with variable nozzle tips which allow you to adjust spray widths as well as concentrate certain areas such as corners or roof edges without having to move the machine too much. Some even offer quick-change nozzles meaning less time spent changing out equipment when switching from a power washer to an extending wand.
Paint your siders to protect them from the elements
Painting your siders will offer protection from the elements. If you have a cedar shake siding, then it is best to use exterior paint that can withstand extreme weather conditions and will not peel or chip away over time like some of those cheaper paints on the market these days.
If you live in a region where there are severe winters with lots of snow and ice, add extra coats! Keeping your house well-painted will help prevent cracks and other structural issues as they’re less likely to form when moisture gets into any newly exposed wood areas because it has been protected for so long beforehand. And make sure that all vents are correctly caulked too! We cannot overemphasize this point enough.
In painting your siders, it’s best to use a brush rather than an applicator. Brushes allow you to paint more evenly and with less overspray, which means that no siding will be left behind uncovered when the painting process is complete!
If there are any nails sticking up from the roofing or trimming boards, don’t forget about those either—nails can cause stains on the outside of your home if they’re not taken care of right away. You’ll also want to keep gutters clean so water doesn’t pool around them and start causing damage
It’s not always easy maintaining your siding, but there are some things that you can do on a regular basis that will help keep it looking nice for as long as possible. We’ve compiled the best tips and tricks for how to care for your siding below so check them out!
Inspect for any cracks in the paint and seal them up with caulking or silicone
Damages and cracks in the siding will result in water damage to the wood beneath so be sure to inspect your sider thoroughly for any cracks you may have missed
If there are any nails sticking up from the roofing or trimming boards, don’t forget about those either—nails can cause stains on the outside of your home if they’re not taken care of right away. You’ll also want to keep gutters clean so water doesn’t pool around them and start causing damages.
Your siding also needs to be cleaned regularly. You can use a pressure washer for this, but not all homes will have the connection or capability of one so that’s something you’ll want to figure out beforehand—you don’t want your siding looking greasy and grimy!
If there are any vines on your home, we recommend trimming them back every few months as they will start getting into cracks in the paint and wood around them which could eventually cause major damage.
The last step is repairing anything damaged from windstorms, severe weather events like hail storms, or hurricanes/tropical storm-level rainfalls. If it’s just minor repairs needed (like taping up loose boards), let these wait until winter when it’s a bit more manageable.
After that is said and done, it’s time to take proper care of your roof so it will last as long as possible! If there are any vines on your home, we recommend trimming them back every few months as they will start getting into cracks in the paint and wood around them which could eventually cause major damage. The last step is repairing anything damaged from windstorms, severe weather events like hail storms, or hurricanes/tropical storm-level rainfalls. If it’s just minor repairs
Some of you may find it difficult to reach all parts of your roofing by yourself which is why we recommend hiring a professional roofer if need be. A professional will know how to inspect your roofing without putting themselves at risk while also knowing what type of products is best for treating damaged areas!
Replace any loose tiles on your roof, which can be a safety hazard
Loose tiles can be a safety hazard for the contractors and can cause them to fall off your roof. Replacing loose tiles is relatively cheap and can be done with a few simple tools.
It is safe to advise your contractor to repair and replace missing shingles, cracked tiles, or roof vents
The first thing you want to do when checking for damage is inspecting the siding. If it has been damaged by windstorms, severe weather events like hail storms, or hurricanes/tropical storm-level rainfalls then there may be some areas that need to be repaired.
If you need to replace shingles, tiles, or roof vents then your contractor can make the necessary repairs with a few simple tools like a ladder and hammer. When it comes to replacing siding, typically the most cost-effective option is installing new panels of wood on top of existing siding because it does not disrupt any of the existing sidings.
Some homeowners prefer installing new panels of wood over old ones because it’s less expensive than ripping off all the old shingles first and replacing them one by one after that work has been done. However, if you have time and patience, and don’t mind dealing with all the dust and mess then removing siding is a good option for you.
If you have any damaged shingles, replace them as soon as possible
Damaged shingles will not last very long at all – they’ll start creating problems with water drainage which could lead to leaks! Shingle replacements should happen every 20 years or so but if you notice some damage now then it’s best to get on top of these repairs sooner rather than later.
Fix any holes in your gutters or downspouts before water can get inside of the house
Holes in gutter or downspouts will cause water to leak inside of the house and can lead to moisture problems. This is a big problem for homes with siding that’s made from wood as it tends to rot or get moldy when exposed too much, but even metal siding needs protection from the rain!
Check your roof for damage by looking at its slope
If you notice any areas where there are large gaps between shingles then this might indicate some roof repair work needed. It could be that these places have become weak over time due to heavy winds which blow them away so they need replacing in order to stop leaks – always check around windows and doors first though because if there’s any damage on those parts then replace them before doing anything else!
Water leaks can damage not only the roof but also the walls and ceilings inside of your home. To avoid this problem, make sure that you have a good quality gutter system installed so water can drain away quickly – especially if you live in an area with heavy rainfalls!
Checking for siding damage is a really important step; any places where it’s become damaged will need to be repaired as soon as possible because otherwise water could get trapped against them and cause rotting or mold growth on their surfaces which makes things worse than before. You’ll want to check around windows and doors first too since they’re often weaker points due to people opening them up frequently, plus those are more likely areas to suffer from leaks when they do start happening.